 | | | | Socket | | CPU | | CPU Compatibility |
|
| Intel | 1156(1) | Core i7 | Supports all speeds | | Core i5 | | Core i3 | | 775 | Core 2 Quad | Supports all speeds | | Core 2 Duo | | Pentium Dual Core | | Pentium D | | Pentium 4 | | Celeron D | | AMD | AM3 | Phenom II | Supports all speeds | | Athlon II | | AM2+ | Phenom II | Supports all speeds | | Phenom | | Athlon FX, Athlon 64 FX | | Athlon X2, Athlon 64 X2 | | Athlon, Athlon 64 | | Sempron | | AM2 | Athlon FX, Athlon 64 FX | Supports all speeds | | Athlon X2, Athlon 64 X2 | | Athlon, Athlon 64 | | Sempron | | 940 | Dual-Core Opteron | Supports all speeds | | Opteron | | Athlon FX, Athlon 64 FX | | 939 | Dual-Core Opteron | Supports all speeds | | Opteron | | Athlon FX, Athlon 64 FX | | Athlon X2, Athlon 64 X2 | | Athlon, Athlon 64 | | 754 | Athlon, Athlon 64 | Supports all speeds | | Sempron | |
| |
| Note(1) | Customers that purchased coolers before the inclusion of support for socket 1156, can purchase the separately sold | | | ZM-CS5B mounting kit for installation onto socket 1156. | |
| |
 |
 | No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU. | |
| |
 |
 | No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
AMD sockets require Stock Retention Frame. | |
| |
 |
| |
 |
| |
| Dimensions | 121(L) x 121(W) x 67(H) mm | | Weight | 500g | | Base Material | Pure Copper & Pure Aluminum | | Dissipation Area | 3,500? | |
| |
 |
| |
| Bearing Type | 2 Ball-Bearing | | Speed(1) | 1,150rpm ± 10% ~ 2,300rpm ± 10% | | Noise Level(2) | 17dBA ± 10% ~ 32dBA ± 10% | |
| |
(1) The fan operates at 2,550rpm (34.5dBA) if directly connected to the motherboard’s power connector without the use of
FAN MATE2. |
| (2) Measured 1m distance away from source. |
| |
 |
 Dimensions : 70(L) x 26(W) x 26(H) mm | Weight : 20g | Output Voltage : 5V ~ 11V ± 2% | | | | Allowable Power : 6W or lower | Connector : 3-Pin |  | | |
| |
 |
 | Does not generate noise or vibration in Silent Mode. | | |  | Pure copper and pure aluminum base materials ensure excellent heat dissipation. | | |  | Compatible with all single and dual core CPUs for Intel Socket 1156/775 and AMD Sockets AM3/AM2+/AM2/754/939/940. | | |  | The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance. | | |  | The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance. | | |
| |
 |
 | - Cooler (CNPS7500-AlCu LED)
- Clip Support
- Clip Support Fixing Bolts
- Washers
- Nuts
- Thermal Grease
- Clip Lever
- FAN MATE 2
- FAN MATE 2 Cable
- Double-Sided Tape
- User’s Manual | | | |
| |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers. |
| |
 |
| Korean Patent Reg. No. 389257 | | | | Korean Design Reg. No. 327440-3 | | | | Patent applications pending in over 20 nations around the world including USA, EU, and Japan. | |
| |
 |
| The maximum weight for a cooler is specified as 450g for Intel Socket 1156/775 and AMD Sockets AM3/AM2+/AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer. | | | | The computer system may automatically shut down when booting the computer after the system monitoring program outputsa warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the ‘CPU Fan Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,150rpm or lower in the system monitoring program. | | | | Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking. | |
Photo 
